Single-Board Computers
The Raspberry Pi computer series do not have a battery source to ensure that firmware settings are saved even if the computer loses power. This means that they do not use a conventional BIOS or EFI architecture.
Instead, these systems use a configuration file that is stored on the hard drive and used to configure the system during the boot process. These settings are configured through the command line or a graphic user application.
Performance Options
Overlay file system, disable read-only. GPU memory.
Interface Options
SSH and VNC if desired. Disable unneeded such as SPI, I2C, serial port, serial console. 1 wire, remote GPIO.
System Options
Change password. Change hostname, this is used for mdns, I.e. raspberrypi.local. power led. Wait for network connection.